---
title: 3D Unit Images
slug: 3d-unit-images
icon: 🏢
docTags: 
createdAt: 2025-03-03T16:16:02.624Z
---

## 1. Introduction

The **3D Unit Images** section in the **Rental System Settings** of the **Storagely Dashboard** allows facility operators to assign **3D images** to different storage unit sizes and types. These images enhance the online rental experience by providing **visual representations** of units, helping potential renters better understand available options.

## 2. Navigating to 3D Unit Images Settings

To access the **3D Unit Images** settings:

1. Log in to your **Storagely Dashboard**.
2. In the **left sidebar menu**, click on **Rental System**.

   ::Image[]{src="https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/ZHWqYhLCGRPKCWgMMS74s_rental-system.png" size="36" width="366" height="846" position="center" darkWidth="366" darkHeight="846" showCaption="false"}
3. Select **3D Unit Images** from the available options.

   ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/nQF7IxA3SSE2iooEF9UB8_screenshot-2025-05-16-at-75000-am.png)

## 3. Understanding the 3D Unit Images Interface

The **3D Unit Images** page consists of multiple sections for managing and assigning unit images.

### A. Selecting Unit Types for Image Assignment

- A **dropdown menu** allows users to select a **specific unit type** (e.g., **Drive-Up, Climate-Controlled, RV/Boat Storage**).
- Users can select **“All Types”** to apply an image to multiple unit types at once.

  ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/Zx3RXKeRy9KZzblKfKXcX_screenshot-2025-05-16-at-80951-am.png)

### B. Assigning 3D Images to Specific Unit Sizes

- When a **unit size** is selected, the system displays any **unassigned unit sizes** below that still require a **3D image**.
- Users can **bulk select** multiple unit sizes and assign them to a single image. 

  ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/tt3-6Okcx4rgaB8j0N8DD_screenshot-2025-05-16-at-81309-am.png)
- Once the unit sizes have been selected, click "**Confirm Selected Sizes**" to upload the 3D image. 

### C. Uploading 3D Images

- Facility operators can upload a **custom 3D image** for each unit type and size.
- The uploaded image must be in an **accepted file format** (e.g., .jpg, .png, .webp).
- Users must click **“Save Changes” **to apply the image to the selected unit sizes.

  ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/3WXjQXv64xKnSUQk6b1Sd_screenshot-2025-05-16-at-85322-am.png)

### D. Managing Existing 3D Images

- The **image management section** displays all **previously uploaded 3D images**.
- Each image shows:
  - The **unit type** it is assigned to.
  - The **unit sizes** associated with the image.
  - The current **publish/unpublish status**.
- Operators can **edit or remove** images as needed.

### E. Publishing or Unpublishing 3D Images

- Users can **publish** all assigned **3D unit images** for public visibility.

  ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/I2Edfinth3PAxrAW5VkFl_screenshot-2025-05-16-at-85736-am.png)
- If needed, operators can **unpublish all images** to temporarily disable them from customer view.

  ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/36fyv-LWKi_jnPI2U6qe6_screenshot-2025-05-16-at-85935-am.png)

## 4. How to Assign a 3D Image to a Unit Type and Size

### Step 1: Select a Unit Type

1. Click the **“Select Unit Type”** dropdown menu.
2. Choose a unit type (e.g., **Drive-Up, Climate-Controlled, Indoor**).
3. If the image applies to all unit types, select **“All Types.”**

### Step 2: Assign Unit Sizes

1. Under **“Unassigned Sizes,”** check the boxes for all unit sizes that should use the selected image.
2. Click **“Confirm Selected Sizes”** to proceed.

### Step 3: Upload the 3D Image

1. Click the **“Upload Image”** button.
2. Select the **3D unit image file** from your computer.
3. Click **“Save Changes”** to assign the image.

### Step 4: Publish or Unpublish the Image

1. Navigate to the **image management section**.
2. Locate the uploaded image.
3. Click **“Publish”** to make the image visible to customers.
4. If needed, click **“Unpublish”** to remove the image from the website temporarily.

## 5. How to Remove or Replace a 3D Image

### A. Removing a 3D Image

1. Locate the image in the **image management section**.
2. Click the **"Remove" **button.

   ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/6wCmXh8Gv8DmdZuIJnUSz_screenshot-2025-05-16-at-90031-am.png)
3. Confirm the removal to delete the image from the assigned unit types.

### B. Replacing a 3D Image

1. Click **"Edit"** to upload a new image.

   ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/dsrlgukUCjQNJxRKgxTKV_screenshot-2025-05-16-at-90125-am.png)
2. Assign it to the **same unit types and sizes** as the previous image.
3. Click **"Save Changes" **to update the assignment.

   ![](https://api.archbee.com/api/optimize/_fbQ1jk8y-6t-s-DYY8Bo/o50D19yHW9WtSJsdxzcVH_screenshot-2025-05-16-at-90232-am.png)

## 6. Best Practices for Managing 3D Unit Images

✅ **Ensure each unit type has a 3D image** to provide renters with a clear visual.
✅ **Use high-quality images** to enhance the customer experience.
✅ **Regularly update images** if unit types or features change.
✅ **Double-check image assignments** to avoid misrepresenting unit sizes.
✅ **Keep published images relevant** by removing outdated visuals.

## 7. FAQs & Troubleshooting

**Q1: Why is my unit type not listed in the dropdown?**
A: The unit type may not yet be set up in the system. Contact **Storagely Support** for assistance.

**Q2: Can I assign the same image to multiple unit sizes?**
A: Yes! Use the **“Select All”** option under **Unassigned Sizes** to apply one image to multiple sizes.

**Q3: What happens if I delete a 3D image?**
A: The unit sizes previously assigned to that image will no longer display a visual. You must **upload a new image** to replace it.

**Q4: How do I ensure images appear on the website?**
A: After uploading, make sure to **publish** the image in the **image management section**.

*As always, if you have any questions during this process, our Customer Success Team is here to help. The best way to reach us is by submitting a support ticket.*

**[Submit a Ticket](https://d1s7s.share.hsforms.com/297GkKIsiTSmDgSKUYT9s2g)**